วิธี Clear counter Brother DCP ทุกรุ่น
1. ถอดปลั๊ก กดปุ่ม Menu ค้างไว้ แล้วเสียบปลั๊ก รอจนหน้าจอขึ้นคำว่า Maintanance Mode แล้วปล่อยมือ
2. กด 80 (โดยใช้ลูกศรเลื่อนเจอตัวเลข 8 แล้วกด OK แล้วกดเลื่อนเจอ 0 กด OK)
3. กด Mono Start ไปเรื่อยๆ หาคำว่า Purge : XXXX (กดประมาณ 25 ครั้ง)
4. กด 2783 (โดยใช้ลูกศรเลื่อนเจอตัวเลข 2 แล้วกด OK แล้วกดเลื่อนเจอ 7 กดOK แล้วกดเลื่อนเจอ 8 กดOKแล้วกดเลื่อนเจอ 3 กดOK )
5. ตัว Purge : 0000 จะกลายเป็นศูนย์ทั้งหมด แล้วกด Stop
6. กด 99 (โดยใช้ลูกศรเลื่อนเจอตัวเลข 9 แล้วกด OK แล้วกดเลื่อนเจอ 9 กด OK)
1) Press the
Menu and Mono Start keys. Next press the key four
times to make the machine enter the maintenance mode.
(2) Enter 8 and 0 by using the and Set keys.*
(*To enter a numerical code on models having no
numerical keypad, press the key several times to
display the numerical code to be entered and then
press the Set key. Repeat this operation for each
numerical code.)
(3) Press the
(4) Enter 2, 7, 8, and 3 by using the and
Set keys to reset the purge count to zero.*
(5) Press the
Stop/Exit key to return to the initial stage of the
maintenance mode.
(6) Enter 9 twice by using the and
Set keys to exit from the maintenance mode.
Mono Start key several times until the purge count
appears on the LCD.
การล้างหัว clean หรือการสั่งทำความสะอาดแบบละเอียดของ brother
1. กดเมนูค้างไว้ พร้อมกับเสียบปลักไฟ
2. เข้าไปที่ maintenance กด 76
– ถ้ากด 4 ล้างทั้งหมด หน้าจอขึ้น Maintenace แล้วกด Mono Start เครื่องจะทำการล้างหัวพิมพ์
– กด 3 ล้างเฉพาะสีดำ
– Test กด 09
3. ออกจากระบบ กด 99